Entity: timestamp

• File: timestamp.sv

Diagram

Description

Timestamp outgoing packets and calculate RTT for incoming packets using this timestamp. For incoming packets we also replace the timestamp with the RTT (in number of cycles). Must be explicitly enabled using the configuration interface. Otherwise this module does nothing.

Generics

Generic name	Type	Value	Description
TIMESTAMP_WIDTH		32
TIMESTAMP_OFFSET		(112+32)
## Ports

Port name	Direction	Type	Description
clk	input
rst	input
rx_in_pkt_data	input	[511:0]	RX input.
rx_in_pkt_valid	input
rx_in_pkt_ready	output
rx_in_pkt_sop	input
rx_in_pkt_eop	input
rx_in_pkt_empty	input	[5:0]
rx_out_pkt_data	output	[511:0]	RX output.
rx_out_pkt_valid	output
rx_out_pkt_ready	input
rx_out_pkt_sop	output
rx_out_pkt_eop	output
rx_out_pkt_empty	output	[5:0]
tx_in_pkt_data	input	[511:0]	TX input.
tx_in_pkt_valid	input
tx_in_pkt_ready	output
tx_in_pkt_sop	input
tx_in_pkt_eop	input
tx_in_pkt_empty	input	[5:0]
tx_out_pkt_data	output	[511:0]	TX output.
tx_out_pkt_valid	output
tx_out_pkt_ready	input
tx_out_pkt_sop	output
tx_out_pkt_eop	output
tx_out_pkt_empty	output	[5:0]
timestamp_config_t	input		Configuration.
conf_ts_valid	input
conf_ts_ready	output